12′ ridge cap roll former W open hem vented ridge cap for metal roof roll forming machine
A Ridge Cap is a piece of roof flashing metal placed at the very peak of the roof, where the two roof slopes meet, creating the ridge.
This is the very last step on installing a roof system. It is not only a decorative portion of a roof, but it creates a leak proof water directional barrier.
A Vented Ridge Cap can provide proper ventilation to an attic, where heat from the house builds up. It is crucial for the air vapors and moisture to have a way out of the house to prevent mold and premature all around deterioration, including damage to the roofing material, such as shingles.
Metal roof ridge cap machine has different types which used together with corrugated sheet and IBR sheet, or glazed tile sheet.
The ridge tiles sheet is widely used in many kinds of industrial factory, civilian buildings, and Roof board for attached part product.
It has advantage of pretty appearance, durable using and so on.
Technical Details
| Machine Specifications | |
|---|---|
| Weight | About 4000kgs |
| Size | About 6m x 1.0m x 1.5m (length x width x height) |
| Color | Main color: blue |
| Warning color: yellow | |
| Suitable Raw Material | |
| Material | PPGI and PPGL Coils |
| Thickness | 0.3-0.8mm |
| Coil width | 610mm |
| Yield Strength | 235Mpa |
| Main Technical Parameters | |
| Diameter of forming rollers shafts | 55mm |
| Roll Forming Speed | 15-20m/min |
| Forming rollers material | No.45 steel, coated with chromed treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | PLC and Converter |
| Electric Power requirement | Main motor power: 4kw |
| Hydraulic unit motor power: 2.2kw | |
| Electric voltage | According to customer’s requirement |
To know more about this machine, please check the working video by click this link:
