C Channel Solar Stand Roll Forming Machine
C Channel Solar Stand Roll Forming Machine
1,Technical parameters of machine
Width of material sheet:200 mm
Thickness of material sheet: 1.5~3.0mm
Material of sheet:Low carbon,etc
Line production speed:8m/min including punching
Length of the work piece:2000-6000 mm
Total Power:41KW.
2,General structure of equipment
2.1Passive De-coiler
Width of material sheet:250 mm;Thickness of material sheet: 2.5mm;
Inner diameter: 508mm Range of expanding: 480-520 mm
Maximum outer diameter: 1300mm, loading: 3T
2.2 Leveler
Working roller: Five rollers type leveling machine
Motor:380V 5.5KW 4 grade
2.3Servo feeder
Function:material feeding
Motor: 380V 3KW 4grade,additional air compressor(Air pressure0.5m3/min pressure0.6MPa )
2.4 Punching press
Structure:JF21-80
Punching press: Uses the steel plate welding fuselage, the rigidity is strongwith good appearance .Uses the combined type air operated friction clutch.
Motor:380V 2.5KW 4grade
2.5 Main forming machine
Forming stations:24stations(roller)
Forming machine:C channel
Forming frame:Dragon-type,gearbox drive
Max. Feeding width: 200mm
Max. Feeding thickness:2~2.5mm
2.6 Cutting machine
Flying saw cutting without bur
Motor power: 2.2KW
Quantity of cutting blades: 1sets Cutting type:Flying saw cutting without bur
2.7 Run-out table
2.8 Electric control system
Main Machine Technical parameter
| ,NO. | Name | unit | parameter | remark | |
| 1 | materials | Type | Mild steel galvanized sheet | ||
| Plate strength | 350 | ||||
| Plate thickness | mm | 1.5~2.5 | |||
| 2 | specification | mm | See the picture | ||
| 3 | speed | m/min | 6~8 | ||
| 4 | Material of the roller | GCr15 Hardening treatment | |||
| 5 | drive type | Gear box | |||
| 6 | power | kw | About40 | ||
| 7 | Electrical control system | PCL frequency control | |||
| 8 | Size(lengthXwidthXheight) | m | 35X4X3.9 | ||