ZSHG50 Precise Argon-arc TIG welder tube forming machine Decorative pipe

Argon-arc TIG welder tube forming machine is a kind roll forming machine. Take steel coil with thickness 0.3mm-1.0mm, or 1.0mm-3.00, by many steps of rollers cold bending system, to form a seam tube, then the TIG welder to form the pipe as a seamless tube.
Argon-arc TIG welder tube forming machine forming machine is designed according to the tube diameter and the thickness of the tube, the more thickness, the slower speed. The speed is about 3-12 meters/min. Comparing with the high frequency (HFI) welding pipe forming machine, this Argon-arc TIG welder tube forming machine is much cheaper in cost.

This Argon-arc TIG welder tube forming machine is formed by : Unfolding Strip—Branding—Forming—Welding—Grinding—Sizing–Straightening—– Length fixing— Cutting   Unloading
The Argon-arc TIG welder tube forming machine is newly designed based on practical producing and acquiring the advantages of equipment home and abroad,which is also convenient in operation and maintenance.

Below is some specifications of the ZSHG50 Precise pipe forming machine:

4.Finished stainless steel tube specifications:
For Round tube: Φ19.05—Φ76.2 mm Thickness: 0.4—4mm
For square tube: 15×15—60x60mm Thickness: 0.4—4mm
For rectangle tube: 15×15—40x80mm Thickness: 0.4—4mm
Tube Length: 4m—10m
5.Production speed for the stainless steel tube: 0.5—7m/min
6. Land for installation: 24mx1.2mx1.4m (L x W x H)
7. Workers required: 1 person can operate 2 sets of this Tube Mill.
8.Voltage: 415V/ 420V/ 440V
9.Process flow:

1.General Introduction:
ZSHG50 Tube Mill is designed to produce SS welded round tubes of Ф19.05—Ф76.2mm in diameter and 0.4—4mm in wall thickness, with the characters of advance, steady, perfect and maturity etc. The mill line is newly designed based on practical producing and acquiring the advantages of equipments home and abroad,which is also convenient in operation and maintenance.
2. Main Technical Parameters:
2.1 Material of the coils: Stainless steel
Strip Width: 59–240mm
Strip Thickness: 0.4–4mm
Coil Weight: 3T
2.2 Finished Product Range:
Diameter of round tube: Ф19.05–Ф76.2mm

2.3 Wall thickness of finished tube: Round: 0.4–4mm
2.4 Length of finished tube: 4–10m
2.5 Fixed
2.6 Forming Speed: 1–8m/min

(1) Feeding guide bracket: 2 groups; Clean linking device: 1 pcs
(2) Vertical stand: 6 groups, material: 40Cr; the tempering high-frequency quenching fine grinding chrome plated processing. Material for shelf: HT200
(3) Horizontal shaft: material:40Cr diameter of axle: 50mm
(4) Vertical shaft: material:40Cr diameter of axle: 35mm
(5) Horizontal stand: 7 groups; 40Cr; the tempering high-frequency quenching fine grinding chrome plated processing
Material for shelf: HT200
(6) Slow wave box transmission system: 1 set
(7) Driving motor: 1 piece
(8) Machine base: 1 set
(9) The universal shafts connection (Chuanxin Groups)
(10) Grinding shaft: material: 40Cr

We also have the High Accuracy Galvanized Steel Weld Pipe Roll Forming Machine if you want to know about this steel welde pipe roll forming machine or TIG welder tube forming machine Decorative pip you can contact us with Email roofingmachine@zhongtuocn.com