All posts by Zhongtuo2019

Product

Rolling Forming Machine for Double Glass Tile Roof Panel

Supply: double-layer color steel tile press/double-layer composite tile press/glazed tile press/double-layer forming machine/color steel tile forming machine/purchasing color steel tile machine/price of color steel tile machine/sandwich plate equipment/color steel composite plate equipment/quotation of color steel tile equipment/color steel tile equipment consultation/color steel tile production line/color steel tile machinery/color steel tile machinery/color steel tile equipment sales

IMG_9797

Product Description: The production line of multi-functional color steel thermal insulation composite board adopts advanced production technology, which integrates gas, electricity and machinery. It is a special mechanical equipment for processing color steel thermal insulation composite board. Its working speed is variable frequency and stepless high speed, and it can be compounded into corrugated composite board at one time. The whole assembly line consists of feeding mechanism, forming mechanism and compound mechanism (reinforcement, glue coating, heating and compounding). Ribbing, slotting, trimming, pneumatic and automatic cutting) are indispensable equipment for panel and wallboard of industrial plant and warehouse. Technical parameters: power supply 380V/50-60HZ; total power: 32KW; production line speed: 0-4m/min; product width: 1000mm, 120mm; product thickness: 50-250mm; annual output: 600,000 square meters. Captain 36M, there are two kinds of production line of multifunctional color steel heat insulation composite board: foam and rock wool dual function machine and single function machine. The whole production line can be operated by 4-5 people, and can produce different colors of color steel thermal insulation composite sheets. Correct debugging of color steel forming equipment can improve the service life of tile machine and bring corresponding efficiency and benefit to enterprises. Reasonable and regular operation will also avoid some unnecessary accidents, which is also a good way for operators themselves. Adjustment method of press plate deviation of color steel tile equipment-tile press, such as running right, padding left corner, or falling right bottom flat. Firstly, the four corners of the front and rear queues of the color steel tile press equipment are the same from the frame to the end of the axle. Then, from the first row to the last row, find a line to straighten, check whether the lower axle is in a straight line, and adjust the left and right sides of the lower axle to a level. Find the center of the first and last row of the color steel tile equipment, then fasten the lock mother on both sides, draw a straight line before and after the center of the middle wheel, and adjust the gap between the upper and lower axles, then adjust the machine along the straight line.

IMG_9798

Making features of bolt balls for color steel tile equipment:

Production of bolt balls for color steel tile equipment: There are two ways to process the blanks of bolt balls, one is casting, the other is die forging. Foundry balls are prone to cracks and sand holes, and die forging balls are of good quality, high efficiency and low cost. The finished products of C-beam mill rolled by C-beam mill equipment have good flatness in tension, bending and compression, automatic fixed-length cutting, automatic punching, high automation, fast and convenient installation. The products can be used as the main force-bearing structures of large and medium-sized industrial and civil buildings, such as the roof load-bearing and wall flat support of workshop, garage, hangar, exhibition hall, cinema, market flower shed. The appearance is regular, the edges are straight, not twisted and warped, there are no defective cracks on the front and back sides, and the claws are well angled (guaranteed to hang firmly). When making color tile in large tile factory, the mould is made of high-strength aluminium alloy, which is smooth and regular, and the tile produced is naturally flat and precise in size; while in small factory, the iron sheet is used as the mould, which is itself warped, and the tiles coming down can not be leveled and standardized. This directly affects the paving effect. The cracks in the roof are large and irregular, and the effect of rain, wind and heat insulation is obviously poor. Measuring method: Put the tile on the plane, press it to know whether it is warped and flat, and look at the edges of both sides with eyes to know whether it is flat or not.

Videos

Ridge cap roll forming machine for roofing cap building material

What is ridge cap?

A ridge cap is a building material that is installed along the ridge line of a sloped roof. A traditional gabled roof on a home is made up of two sloped sides that meet in the middle. The point where these two sides meet forms the apex of the roof, and is known as the ridge or ridge line. A ridge cap fits over the joint between these two edges to keep rain and snow out of the home. It also helps to finish off the look of the roof by creating a tightly sealed joint along the two sides. Now in the market as far as I know, there are two types: bending type ridge cap and round wave type ridge cap. So for making ridge cap machine there will be two types too. Here are some picture for your reference:

The the following pictures is about round metal ridge cap.

round metal ridage cap
round metal ridage cap

 

 

 

bending ridge cap
bending ridge cap

 

 

 

 

 

 

How the metal round ridge cap is made by machine?

Same as other roll forming machines, this machine principle is also roll forming. From decoiler to runout table, it processes by several parts. But this roll forming machine is the special high speed roll forming machine for steel sheet cold-form industries. It can continuous form the steel sheet according to customer’ s requirement, automatically cut to length. This equipment has many advantages, just like high forming speed, low noise, stable transmission, easy operation, good look and so on.Here is one machine of the machine for your reference:

ridge cap roll forming machine
ridge cap roll forming machine

 

 

 

 

 

 

 

 

 

 

Here are some parameters of this machine for your reference:

No. Item Parameters Remark
1 Suitable material Type Color steel
Thickness 0.3—0.5mm
Yield stress(MAPS) 195 mp–350 mpa
Coil width
2 Working speed 5m/min
3 Main machine driving motor(kw) 3kw Depends on actual
4 Hydraulic power 5.5KW Depends on actual
5 Total power 8.5kw Depends on actual
6 Roller diameter 60mm Depends on actual
7 Number of station 9 steps Depends on actual
8 External dimensions(L×W×H, m) 5.5M×0.8M×1.5M Depends on actual
9 Machine weight 3.8T Depends on actual
10 Material of shaft 45# steel adjustable treatment
11 Shaft outside diameter 70mm
12 Machine frame 350# H steel welded
13 Surface processing The thickness of hard chromium on the roll surface is 0.05mm.

 

And for the bending type ridge cap, we need to roll forming the raw material to the type you need and then bend it to the degree you need. By this way, we can make it like a ridge cap , here is one pictures for your reference.

bending ridge cap1
bending ridge cap

 

 

 

 

 

 

 

 

 

 

 

 

For those two types ridge cap machine we have, when you need, please contact me at any time. Here is my email box cnzt002@zhongtuocn.com.

 

Videos

Foreign selling light steel keel molding equipment

Foreign selling light steel keel molding equipment

Equipment components
Equipment from discharge machine, the guide frame, forming the host, correction means, length cutting portion, receiving station, consisting of electrical control and so on.

Equipment performance
Unit rolling capacity: Wide -200mm,
Sheet thickness 0.6-1.2mm
Production speed: 15-30 m / min
Total installed capacity: about 5.5kw
Production area: 15 meters long, 2.5 meters wide X
Foreign selling light steel keel molding equipment

My company’s equipment has several advantages
1. Device control PLC control system during normal production set multiple security.
2. bed as steel weldments. And for tempering, eliminate stress, avoid distortion of the fuselage.
3. The molded frame is cast iron structure, and by tempering. Strong high, long service life.
The roller shaft material is 40Cr, and after quenching, the hardness is HB280.
5. The mold material is GCr15, quenching, hardness: HRC56-62
6. The transmission structure of the gearbox. Each rack has a gear box molding can ensure that equipment over time, high-intensity running, and long service life.

Videos

ZT-900 wall panel roll forming machine

ZT-900 wall panel roll forming machine main technical parameters

Installation size: 4800mm — 1200mm — 1000mm
Molding channel number: 10
Roller material: 45 # steel
Roller plating thickness: 0.05m
Cutter material: Cr12
Forming speed: 9-10m / min
Electronic control system: Industrial computer PLC control
Drive: count accurately, anti-knife function (optional)
Host power: 3kw
Hydraulic station power: 3kw
Plate thickness: 0.2-0.6mm
Expand sheet width: 1000mm

20151015160828 20151015160845
Zt-900 wall panels roll forming machine pressure plate connected to the roof to break the traditional practice of using screw gun connection,installation methods is use 45 football snaps installation ,make the roofing have better waterproof.By zt-900 wall panels forming machine roll forming a pressure plate ,not only dignified and elegant,beautiful novel,and the appearance of smooth,corrugated uniform,high utilization,high strength,high degree of automation,low cast,durable.This zt-900 wall panel forming machine is widely applied to large and medium enterprises civil construction,such as factories,machines garages,hangars,stadiums galleries,theaters and so on .

HTB1l1nDIpXXXXcvXXXXq6xXFXXXO

ZT-900 wall panels forming machine features

1.fireproofing:color composite sandwich panels surface meterial and insulation materials non-combustible material,fully able to meet fire code requirements.
2.High intensity: zt-900 wall panels forming machine using high-strength steel for the substrate (anti-tensile strength 5600KG / CM) coupled with the most advanced design and roll forming, with excellent structural properties.
3.Durability:Various studies have shown that ,and more than 40 years abroad widely used confimed,with a special color coating steel shelf life of at 10–15years,every 10 year after spraying anti-corrosion coatings,lumber life of up to 35 years.
4.Installation is quick: the light weight composite panels, splice installation and can easily cut characteristics, determine its simple installation, can greatly improve efficiency, saving period.
5.Beautiful: pressure plate clear lines of up to dozens of species of colors, can meet the needs of any style buildings, to achieve satisfactory results.

Videos

Floor deck roll forming machine

Floor deck roll forming machine

Equipment Description
1. Material:
1) Coil Width: 1000mm
2) Suitable Coil Thickness: 0.3-0.7mm
3) Suitable Raw Material: Galvanized steel sheet
2. The Chart of Process flow

picture1

Manual de-coiler — Electric Feeding — Servo motor feeding —-oll Forming Machine——Computer Control Cabinet—Automatic cutting Mechanism —Run-out Tables
3. The equipment including
Roll forming machine 1 set
Hydraulic cutter 1 set
Electrical control system 1 set
Hydraulic system 1 set
Normal run out table 3 PC 1m*1m
Manual de-coiler 1 set Max. loading 5 T
4. Technical specification and details
(1) Hydraulic Ue-coiler
Un-power: manual de-coiler; Max. Capacity: 7T
Suit for coil inner diameter: 508mm, suitable coil Max. out diameter: 1000mm
Manual power expands the coil inner surface.

floor-deck-roll-forming-machine-1
The de-coiler for reference:

(2) Roll forming machine

1) Number of forming steps: 17 steps

2) Material of shaft: 45# steel hardening and tempering treatment. Outer diameter 85mm ,total solid

Tolled shafts

3) Rollers: Material is high grade No.45 forged steel, with digital-controlled procession. The rollers are plated with hard chrome with thickness of 0.05mm on the surface after being machined by the exact machine tool. So that to ensure long life of forming rollers.
4) Main motor power: 4 KW with cyclical planetary gear speed reducer
5) The plating chromium’s thickness on the surface of rollers: 0.05mm
6) Main stand: 350# H steel welded structure Wall plate thickness: 14mm the main frame of machine is welded separately and the outside wall is connected by screw after being rot blasted on the surface.
7) Chain and gear move the line, motor drives. All working actions are controlled by PLC electric cabinet automatically.
8) Suitable power voltage: 380V/50HZ/3Phase (can de designed according to buyer’s requirement)
9) Line working speed (Forming speed): about 15-18 m/min (without cut time)
10) Main machine motor power: about 5.5 KW (Depend on final design)
Dimension of the machine: 9000mmx1200mmx1200mm
Weight of the machine: about 5000kg

floor-deck-roll-forming-machine-2

Equipment for Reference:

(3) Hydraulic Cutting

1) Adopts post cutting, Stop to cut;
2) The cutting blade material is Cr12 with quenched treatment.
3) Adopts welded frame for good rigidity.
4) Cutting frame has been heat treatment to avoid final product deformation. cutting length tolerance ±2mm.
5) The power of cutting is provided by hydraulic station.
6) The final product can be cut as per set length in PLC controller, and the length is automatically measured by encoder. When final product reaches the set length, machine will stop to cut the Product automatically. Finish this action, machine will run again continuously.

Hydraulic Cutting for reference:

(4) Hydraulic station
1) It supplies the power for the hydraulic cutter.
2) All hydraulic accessories are all use Chinese famous brand products.
4) Hydraulic motor power: 3KW

floor-deck-roll-forming-machine-3
Hydraulic station for reference:
(5) PLC Control System
1) This system uses Delta PLC to control the all working actions. Production quantity and each piece length will be automatically measured. It is convenient to control the roll forming machine.
2) Delta converter adjusts speed technology, realize the automatic production.
3) Text screen is input and cancelled the working data.
4) Friendly man-machine interface system can be set batches to the work piece, length, quantity, etc.
5) Encoder count, having function of count and measuring length.
6) Suitable power voltage: 380V/50HZ/3Phase (can de designed according to buyer€™s requirement)
Computer system for reference:
(6) Product Rack (un-powered)
1) They are used to put the final product when product coming out from cutting device.
2) Two pieces, each piece length is 1m, total length is 3 meters.
3) Collect the final product and final products are convenient to be stacked by workers.
Product Rack for Reference:
(7). Products for Reference
Products for Reference:
5.Equipment Details.

Our service:
Warranty:
One year, and we will provide the technical support for the whole life.

Videos

sheet metal roll forming machines

sheet metal roll forming machines

sheet metal roll forming machines are widely used in building: the steel-structured large-scale warehouses, plants, supermarkets,shopping malls, trade markets, stadiums, holiday villages, sanatoriums, hotels, villas, residences, and different kinds of greenhouses. What’s more, equipment can be designed and manufactured as customers’ requests.

Our roll forming machine is very good ,it is through quenched and tempered. It can used 3-5 years.

Packaging & Delivery

Packaging Details: exactly as per the requirements of the shipping standard to make

sure the machine is totally ok at the customers’ side.
Delivery Detail: 15 days, some models are available in stock.

metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine

Product Description

General information for the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine

The tiles produced by this machine are widely used in all kinds of factories, houses, warehouses and simple steel shed, and with beautiful appearance, high efficiency and reliable working.It consists of feeding platform, main molding core, shearing mechanism, hydraulic station, computer control cabinet, high precision counter and so on.

Detailed components introduction for the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine

1.. Manual Decoiler of the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine

1):coil inner diameter: 450-550mm
2):coil max width: 1250mm
3):max carrying capacity: 5000kg
Usage:It is used to support the steel coil and uncoil it in a turnable way.
Passive uncoil pulled by roll forming system

Hydraulic fully automatic style is optional

2.. Coil feeding part of the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine

Usage:Put the raw material(steel plate) through the beach to manufacture and process,
it can guarantee that the products are neat, parallel and everything is uniformity.
Please refer to the equipment regulation to know the function of locate angle iron.

3.. Main roll forming machine part of the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine

1).roller material: 45# steel with hot treatment at 52-68 degrees, hot chormed on the surface to make sure its hardness.
shaft material: solid shaft(not hollow style), around 70kg/pc, to make sure the strength of it.and final profile shape are perfect in this way.
shaft diameter: normally is 72mm.
2).power: normally 7kw in total
3).transmission model: gear and chain
4).controlling model: PLC controlling system, fully automatic.
5).Forming speed: 0-17m/min
Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor
reducer drive, chain transmission,roller was chromed which can keep the molding plate surface
smooth and not easy to be marked when it is working

4.. Automatic cuttting system of the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine

1).Material: blade, puncher and mold material: Cr12 steel with quenched treated 60-62
2).Cutting system: advanced hydraulic drive, automatic cutting after forming, no distorting or
wasting, high level safety factor.
It adopts the hydraulic drive and automatic encoder to cut the accurate length you set on the computer.The tolerance is within 10m±1mm
Material of blades: Cr12 quenched
Power supply : hydraulic power
Components:It contains one set of blade, one hydraulic tank and one cutter machine

5.. Computer controlling part of the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine

1).PLC brand: Normally, it is Delta. Mistubishi, Panasonic, Siemens are optional.
2).working model: fully automatic and manaul
3).working language: normally are English, Chinese,Russia. Can be set as per your requirements.
Hydraulic station of the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine
1).including one motor,one oil tank,one magnetic valve,one pressure gage, hydraulic oil tube
2).3kw,4kw,5.5kw,will be adopted as per your profile sheet.

The assembling production flow of the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine

Packaging & Shipping

Usually the metal roof sheet making machine/Zinc roof tile making machine/galvanize roof panel roll forming machine can be packed into one 20 feet or 40 feet container. we have good relationship wih the shipping agent to get good freight price for you and you can also find yourself at your side.

 

Videos

T profile roll forming machine

T profile roll forming machine

 

Product Description
Machine

Description

 Quantity Delivery time Container

Type

 Price/ USD

(FOB TIANJIN)
ceiling grid

machine

 1 SET 45 working daysafter

receiving deposit

 One 20GP 9900—21900

 

Usage of ceiling grid machine:

Ceiling t grid is suspension false ceiling consisting of the main tee, cross tee, and wall angle to make the grid system

to support the lay-in ceiling tiles. It is easy for installation and maintanence.

 

ceiling grid machine Process Flow:

Uncoiling→Feeding material into machine→Roll forming→Measuring length→ Auto cutting→Products receiving

 

Product name ceiling grid machine
NO. Items Parameters Remark
1 Suitable Material Type GI/PPGI/AL
Thickness 0.40-0.80mm
2 ProductSpecifications Length Any length
Length Tolerance ±2mm/6m
3 Working Speed 25 m/min Standard machine
4 Control System Mitsubishi/Siemens PLC& transducer Custom
5 Total Power 7KW
6 Total Weight About 3.2T Up to final design

 

 

Components of light gauge steel framing machine:

No. Name Unit Qty
1 Manual decoiler set 1
2 Main forming machine set 1
3 PLC control system set 1
4 Hydraulic pump station set 1
5 Post cut set 1
6 Electric motor set 1
7 Output table set 1

 

Un-coiler System of light gauge steel framing machine

Usage: It is used to support the steel coil and uncoil it in a turntable way.

Passive uncoil pulled by roll forming system

Loading capacity Uncoiling width Inner diameter
1.5T 300mm 450-550mm

 

 

Coil feeding part of light gauge steel framing machine

Usage: Put the raw material(steel plate) through the beach to manufacture and process,it can guarantee that the prod

ucts are neat, parallel and everything is uniformity.Please refer to the equipment regulation to know the function of lo

cate angle iron.

 

 

Forming device of light gauge steel framing machine

Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain

transmission,roller was chromed which can keep the molding plate surface smooth and not easy to be marked when

it is working

Feature : Ensure stability , precision and lifetime.

 

No. Main parameter of light gauge steel framing machine
1 Length of the main part 3300*800*1400mm
2 Weight of main part 3.2 t
3 Voltage 380V/50HZ3Phase (as customer’s request)
4 Roller fixer Guide column
5 Frame Middle plate weldedMemorial arch frame type
6 Frame thickness 25mm
7 Drive mode Gear or chain
8 Material of rollers 45# steel with tempering
9 Material of shafts 45# steel with tempering
10 Diameter of shafts <40mm
11 Number of rollers 10 rollers
14 Main power 4kw (Cycloidal planetary gear speed reducer)

 

 

Cutting device of metal stud roll forming machine

Advanced hydraulic drive, automatic punching and cutting after forming, no distorting or wasting, high level safety

factor.

Blade Material Cutting system
Cr12 steel with quenched treated 60-62°C Full automatic

 

 

Controlling device of metal stud roll forming machine

Screen PLC Coder
Text screen displayer Taida DVP14ES from Taiwan ENC-1-1-1T-24 fromSouth Korea

 

 

Hydraulic of metal stud roll forming machine

Orgin Power
Advanced hydraulic system from Taiwan 5.5kw

 

 

Spare parts ( for free)

1. Easy damaged parts: conk 2 pcs, fuse-link 4 pcs;

2. Rubber mat 1 pcs;

3. Bolt spanner 1 pcs

 

Our Services1. Installation and training of metal stud roll forming machine:
a.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
b.Without visiting, we will send you user manual and video to teach you to install and operate.
C.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.2. After Service of metal stud roll forming machine

a.One year guarantee for whole metal stud roll forming machine.

b.24 hours technical support by email or calling

c.If there is any problem found of the machine, we will repair it for free in one year.

Company Information

Cangzhou ZHONGTUO International Trade Co., Ltd is a professional manufacturer and exporterwhich has its own

factory and also cooperate with several production factories and associated nterprises, concerning with the design,

development and production of cold roll forming machines,material of building. It is located in northwest of CangZh

ou, as a long history of cold roll formingmachine production base. All products comply with international quality stan

dards and are greatly appreciated in variety of different markets throughout the world, such as Asia, Africa, Europe,

South America, and Australia and so on.

 

 

Packaging & Shipping

FAQ1. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.2. How to visit your company?a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.

b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pi

ck up you.

3. What can you do if the machine broken?

Our machine’s warranty period is 12months,if the broken parts can’t repair,we can send the new parts replace the b

roken parts freell,but you need pay the express cost yourself.if after warranty period,we can through negotiationfor t

o solve the problems,and we supply the technical support for the whole life of the equipment.

4. Can you be responsible for transport?

Yes,please tell me the destination port or address.we have rich experience in transport.

5. You are trade company or factory?

We are trade company but we also have own factories. Building trade company is just for exporting various types o

f cold roll forming machines.

6. Why your price is higher than others?

As we persist on that each factory should put quality at the first place. We spend time and money on developing ho

w to make machines much more automatic, accurate and high quality. We can make sure that our machine could us

e more than 20 years without any problem. We can provide 2 years free qualityassurance.

7. How long the machine could be made?

Normally speaking, welded pipe making machine could be made without 45 working days. If you need machines in

a hurry, we can make it for you less than a month.

Videos

door frame roll forming machine

door frame roll forming machine

Product Description

Machine Description Quantity Delivery time Container

Type

 Price/ USD

(FOB TIANJIN)
door framerollforming

machine

 1 SET 45 working

daysafte

r receiving

deposit

 One 20GP 7900—29900

 

door frame roll forming machine Process Flow:

Uncoiling——Feeding material into machine——Roll forming——Measuring length—-Auto cutting——Products receiving

door frame roll forming machine

Product name metal joist coldformer
NO. Items Parameters Remark
1 SuitableMaterial Type GI/PPGI/AL
Thickness 0.80-1.50mm
2 ProductSpecifications Length Any length
Length Tolerance ±2mm/6m
3 Working Speed 25 m/min Standard machine
4 Control System Mitsubishi/Siemens PLC& transducer Custom
5 Total Power 8.5KW
6 Total Weight About 7.5T Up to final design

door frame rolll forming machine

Components of door frame roll forming machine

No. Name Unit Qty
1 Manual decoiler set 1
2 Main forming machine set 1
3 PLC control system set 1
4 Hydraulic pump station set 1
5 Post cut set 1
6 Electric motor set 1
7 Output table set 1

 

Un-coiler System

Usage: It is used to support the steel coil and uncoil it in a turntable way.

Passive uncoil pulled by roll forming system

Loading capacity Uncoiling width Inner diameter
1.5T 400mm 450-550mm

Usage: Put the raw material(steel plate) through the beach to manufacture and process,it can guarantee that the prod

ucts are neat, parallel and everything is uniformity.Please refer to the equipment regulation to know the function of lo

cate angle iron

Forming device

Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain

transmission,roller was chromed which can keep the molding plate surface smooth and not easy to be marked when

it is working

door frame rolll forming machine

Feature : Ensure stability , precision and lifetime.

No. Main parameter of light c steel roll former
1 Length of the main part 12000*1700*1500mm
2 Weight of main part About 5 t
3 Voltage 380V/50HZ3Phase (as customer’s request)
4 Roller fixer Guide column
5 Frame Middle plate weldedMemorial arch frame type
6 Frame thickness 25mm
7 Drive mode Gear or chain
8 Material of rollers 45# steel with tempering
9 Material of shafts 45# steel with tempering
10 Diameter of shafts φ40mm
11 Number of rollers 20 rollers
14 Main power 5.5kw (Cycloidal planetary gear speed reducer)

Cutting device

Advanced hydraulic drive, automatic punching and cutting after forming, no distorting or wasting, high level safety factor.

Blade Material Cutting system
Cr12 steel with quenched treated 60-62°C Full automatic

Production receiving table

It adopts welded steel and supported roller to transmit the products.

Controlling device

Screen PLC Coder
Text screen displayer Taida DVP14ES from Taiwan Omron

Hydraulic

Orgin Power
Advanced hydraulic system from Taiwan 3kw

Spare parts ( for free)

  1. Easy damaged parts: conk 2 pcs, fuse-link 4 pcs;
  2. Rubber mat 1 pcs;
  3. Bolt spanner 1 pcs

Our Services

  1. Installation and training:
    a.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also tr
    ain your workers/technician face to face.
    b.Without visiting, we will send you user manual and video to teach you to install and operate.
    C.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.After Service
    a.One year guarantee for whole machine.b.24 hours technical support by email or callingc.If there is any problem found of the machine, we will repair it for free in one year.

 

Videos

Construction technology and operating points of color steel roll forming machine

Construction technology and operating points of color steel roll forming machine

Fixation Color tile press equipment installation have transmissive and a dark button concealed in two.Transmissive fixation is the most common way to color-coated steel roofing and siding installation of equipment, which uses self-tapping screws or rivets color plates fixed to the support member (eg purlins) on, transmission fixed into a fixed crest, trough fixed or their combination.Dark button concealed fixation is with dark button color plate supporting the special fixation dark button first fixed to the support member (eg purlins), the center color plates of female ribs ribs and dark buckle teeth together, generally used for housing panel installation.

color steel roll forming machine construction technology

Lateral and end color plates lap. When you install each piece of steel, it should be accurately placed on the front side lap on a steel plate and a steel plate clamping and front until both ends of the plate are fixed so far.A simple and effective method is to use a pair of gripping pliers are clamped by the overlapping plates.When the plate in the longitudinal direction in place, especially its upper end portion required pliers take the side part,This ensures that the steel plate in place at one end of lap one end and also in the correct position to hold the plate in a fixed process, should always be in the longitudinal grip clamp plate.For end lap, due to the shape of the roof and wall panels are made using the method of continuous process, so that transport conditions may limit the length of the supply plate, usually do not require lap, steel roofing laying length is sufficient to meet the needs of .

DSCN0689
Tapping screw selection should follow the life of the structure when the fixing screw fastener selection to choose from, and pay special attention to the life of the specified fasteners life is consistent overcoat material.Current supply can be provided with a plastic screw head, stainless steel cap or coated with a special durable protective layer,Furthermore, in addition to dark fasten with screws, other screws all with waterproof gasket, and for the case of lighting panels and are equipped with special pressure under the corresponding special washers.

We can provide the color steel roll forming machine.

you can contact me :cnzt008@zhongtuocn.com

ceo@zhongtuocn.com

Videos

High quality glazed tile roll forming machine

High quality glazed tile roll forming machine

High quality glazed tile roll forming machine is use of the hydraulic transmission way,and the PLC contral system also the international brand. The glazed tile roll forming machine made of the antique glazed tile have a beautiful shape.Glazed tile can used in garden-like factory, tourism cenic spot,the hotel and villa,and some family building.

Working Process of glazed tile roll forming machine:

Uncoiling—-Feeding material into machine—-Roll forming—-Measuring length—-Step formed—-Auto cutting—-Products receiving

High quality glazed tile roll forming machine

1 Size of the main part: about 7500 —-1650—-1500
2 Weight of main part:
  1. 3. 5 tons
3 Voltage: 380 V/50 HZ 3 Phase or as your required
4 Roller fixer : middle plate
5 Frame : 350 mm H beam steel welded
6 Drive mode: case of differential
7 Material of rollers: 45# steel, surface hard chromium plating.
8 Material of shafts: 45# steel
9 Diameter of shafts: φ 80 mm
10 Number of rollers : 13 rollers
11 Main power: 5.5 kw

High quality glazed tile roll forming machine

Other characteristics of glazed tile roll forming machine:

Feature : Ensure stability, precision and cutting speed
Function : Automatic cutting controlled by PLC
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12 quenched
Power supply : hydraulic power
Components: It contains one set of blade, one hydraulic tank and one cutter machine.

Warranty of the glazed roll forming machine:

1. Two years guarantee, and we will provide the technical support for the whole life.
2. Training: the buyer should charge of visa, return ticket, food and accommodation overseas and USD50/person/day for salary, one technician needed.
4. Training time: one week (contains the time of installation and adjustment)
Another glazed tile version to figure :

High quality glazed tile roll forming machine

 

The another cold roll forming machine

Roof Panel Forming Machine

JCH roll forming machine

welded pipe machine