Category Product

Light Steel Keel Rolling Machine

C channel steel roll forming machine

C channel steel roll forming machine

C steel roll forming machine technical parameters

Equipment length 7600mm, width 950mm, height 1000mm;
power equipment is 11 kilowatts, hydraulic station power is 11 kilowatts;
Roller bearing steel (GR15), after annealing forged;
Base with 320 I-beam;
Adopted under five on four leveling, to ensure smooth;
Using secondary molding type, ensure equations and Cartesian products, top size can be produced;
Rolling material thickness 1.5mm-3mm (also according to user requirements and design thickness);
The width of the Rolled C steel is 80mm-300mm;
Rolling speed 8-9m / min;

20151013143354
Use of new butt regulatory steel sets, simple, fast and secure;

C steel roll forming machine direction for use

C steel roll forming machine is a roll to produce a variety of specifications C purlin roll forming machine finished single.It made from Manual de-coiler ,Electric Feeding ,Servo motor feeding ,oll Forming Machine,Computer Control Cabinet,Automatic cutting Mechanism ,Run-out Tables.This machine is used automatic punching,simple operation and so on.
C steel roll forming machine equipment rolled C steel finished with good pressure perfomance tension good flatness,automatic fixed-length cutting, automatic punching, high degree of automation, quick and easy installation, the product can be used as medium-sized industrial buildings the main load-bearing structures, such as factories, warehouses, machine garages, hangars, exhibition halls, theaters, stadiums, fairs trellis roof and wall flat load bearing support.Cold-formed steel is the main material production of light steel structure, the use of steel or steel roll forming material.
C steel roll forming machine made the wall thickness can very thin,and it simplifies the production process,improve the production efficiency .It can be produced hot-rolled with the general method but difficult to produce a uniform cross-sectional shape of the complex variety of profiles and cold-formed steel of different materials.

Metal Door Machine

Steel Sheet Curving Machine Drawing

Steel Sheet Curving Machine Drawing

Steel Sheet Curving Machine Technical Parameters

1.Motor Power:2.2 Kw

2.Drive Sprocket: 12A-1

Number of Rolling Stations:5
Unit Dimensions: 1.5 m long, 3.0 m wide, and 1.5 m high

Punching Die Material: 90Gcr

Heat Treatment of Punching Die: HRC52-55°C

Loading cut to length Accuracy:100mm±0.3mm

Rolling Material:45# Steel and PU,surface: hard chrome plated

The single face of Cr electroplating rollers: 0.05mm

Hydraulic Station Motor Power:5.5 Kw

Cylinder Specifications: Φ180mm*80mm

Siemens PLC is adopted

Shenzhen MCGS touching screen operation panel is adopted

Converter is Siemens

Voltage: 415V 50HZ 3P

Drawings for profile/blades/electrical/installation will be provided

picture2

Product Function

This machine makes small-span curve for designed profile roof panel.

Such a curving steel sheet saves roof purlins and steel farme,

and lowers cost accordingly. Moreover, the curving roof is strong and durable,

and looks beautiful and fashionable as well.

picture4

APPLYCATION

RELATIVE MACHINE

Company Information

Our enterprise,Cangzhou Zhongtuo Roll Forming Machinery Co.,Ltd,as the professional and leading manufacturer,can manufacture,design,installation and debug various roll forming machines and metal processing sheet equipments,which produce metal roof wall panel,glazed roof tile,CZ steel purlin,floor decking,roof ridge cap,sandwich panel,roof truss,shutter panel,shutter slat,door frame,guardrail,and metal sheet uncoiler,bending,slitting,cutting,flattening,punching,crimping.

Backed by reasonable design,precision machining and selected material,both our standard and customized machines are characterized by long life,precise forming and easy operation.With our customers trust,our machines have been sent to America,Australia,Russia,India,SriLanka,Nigeria,Pakistan,Uzbekistan,Mozambique,Angola,Turkey,Brazil,etc.

Warmly welcome to China to visit our factory and select the machines you need.

Product

Corrugated Sheet Roll Forming Machine

Corrugated Sheet Roll Forming Machine

Machine Description Corrugated Sheet Roll Forming Machine Roof Panel Machine

To carer for customer’s differrent request, we can customize our Corrugated Sheet Roll Forming Machine Roof Panel Machine as to clients’ drawings or requirement.If you want the price, pls help us to confirm the machine types and engineering drawings at first.This types of machine is widely use in producting of metal roof panle making machine for its practicability and reasonable price.Additionally the roof panel made by it is very popular in the market.

Corrugated Sheet Roll Forming Machine Roof Panel Machine

Production Process of Corrugated Sheet Roll Forming Machine Roof Panel Machine

Uncoiling—–Feeding material into machine—–Roll forming—–Measuring length—–Auto cutting—–Products receiving

Corrugated Sheet Roll Forming Machine Roof Panel Machine

More pictures about our Corrugated Sheet Roll Forming Machine Roof Panel Machine

Parameters of Corrugated Sheet Roll Forming Machine Roof Panel Machine

Material Type:GI/PPGI/AL

Material Width:1000/1200/1220/1250mm(customized)

Material Thickness:0.3—1mm

sheet length:any length

Length Tolerance:±2mm/6m

Working Speed:8m/min(standard machine)

Control System:Mitsubishi/Siemens PLC& transduce(customized)

Total Power:About8.5 KW

Total Weight:About 10T(up to final design)

Loading-capacity:5 T

Uncoiling-width:1000/1200/1250 mm

Inner-diameter: 450-550 mm

Frame : 350 H steel

Drive mode: chain

Material of rollers:45# steel, surface hard chromium plating.

Length of the main part:8650*1650*1500 mm

Voltage:380 V/50 HZ 3 Phase

Roller fixer : middle plate

Material of shafts: 45#steel

Diameter of shafts: 80 mm

Number of rollers : 18 rollers

Delivery date 25 working days
Payment Method 30% T/T in advance and balance 70% after inspection confirmation before shipment.
Warranty
  1. One year, and we will provide the technical support for the whole life.
  2. Need one technician
  3. Training time: one week (contains the time of installation and adjustment)

 

Metal Door Machine

The new color steel roll forming machine design

The new color steel roll forming machine design

About the roll forming machine design had finished.And the now color steel roll forming machine have send to the Customer. Now i will introduct the design about roll forming machine.This roll forming machine have two part is motor reducer drive and chain transmission.

The last have some Parameters about the machine.But the parameters can be Designation.We can also customize the machine according to your requirements

Equipment and Qty.
Decoiler 1 set
Main roll forming machine 1 set
PLC control station 1 set
Hydraulic station 1 set
Post cut 1 set
Electric motor 1 set
Runout table 1 set

Main features of each part
Processing material: Galvanized Coil, PPGI Coil.
Material thickness: 0.35- 1.0 mm
Material hardness: 350 mpa
Material width:1020 mm
Feeding width: 1200 mm
Forming speed: 12 m/min
Uncoiler System
Usage: It is used to support the steel coil and uncoil it in a turntable way.
Loading capacity:5 T
Uncoiling width:1200 mm
Inner diameter: 450-550 mm
Entry Beach
Usage: Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
Main Roll Forming System
Size of the main part: about
8500 Ñ… 1650 Ñ… 1500
Weight of main part: 5. 5 tons
Voltage: 380 V/50 HZ 3 Phase or as your required
Roller fixer : middle plate
Frame : 350 mm H beam steel welded
Drive mode: case of differential
Material of rollers: 45# steel, surface hard chromium plating.
Material of shafts: 45# steel
Diameter of shafts: φ 80 mm
Number of rollers : 17 rollers
Main power: 7.5 kw

roll forming machine design
Shearing Mechanism
Feature : Ensure stability, precision and cutting speed
Function : Automatic cutting controlled by PLC
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12 quenched
Power supply : hydraulic power
Components: It contains one set of blade, one hydraulic tank and one cutter machine.
Hydraulic Station
It is controlled by gear pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job
Power: 4 kw
Hydraulic oil: 46#
Components: The system includes a set of hydraulic tank, a set of hydraulic oil pump, 2 hydraulic pipes. And 1 sets of electromagnetism valves.
Electric Control System
Feature:
1.Adopted PLC, frequency converter, Delta from Taiwan to ensure high speed with stability, precision and lifetime.
If you need, we can change it other brand or little computer type for touching screen.

roll forming machine design

Counter
One counter gauges length, pulses, and decides length.
Omron encoder for length measurement
Accessories
1.Easy damaged parts: conk 2 pcs, fuse-link 4 pcs
2. Rubber mat 1 pcs;
3.Bolt spanner 1 pcs

Payment terms
Payment: 30% T/T in advance and balance 70% after inspection confirmation before shipment.
Delivery:within 45 working days after receipt of deposit.
Warranty
1. Two years guarantee, and we will provide the technical support for the whole life.
2. Training time: one week (contains the time of installation and adjustment)

that’s some parameters about the machine.If you have another demand we also can give you anothe roll forming machine design.

We also have another machine such as JCH roll forming machine,Glazed tile roll forming machine,Kell roll forming machine ,roof panel roll forming machie and so one.If you need you can tell us.We can give you the roll forming machine design about the different machine.

Welded Pipe Machine

High accuracy galvanized steel weld pipe roll forming machine metal tube roling machine

The information fo the high accuracy galvanized steel weld pipe roll forming machine metal tube roling machine

Feeding trolley —-uncoiler—- shovel head machine—- pinch—-shearing—- welding—-deliver—-stroehouse —-’flattening —-forming—-welding guidance—-extrusion welding—- scraping scar —-water cooling—-sizing —-straightening—- flying saw —-roller—-bench—-packing—-warehousing

the main specifications of welding pipe products

name type specifications
pipe circular pipe diameter 50–152mm
square pipe 40 square,50 square,100 square,120 square
rectangular pipe 60—40,60—80,140—100
working speed 30-70m/min
lenth 6m
width 2-5mm
water flow 40-50T/h
reservoir capacity 70cubic meter

The composition of Automatic welded pipe cold roll former mill

High-accuracy-galvanized-steel-weld-pipe-machine

Un-coiler System

Function:the two cone head tighten the steel coil through expanding its inner hole,driven by a motor,the two cone head rotation,and the steel coil will strip apart.

Structure:cone seat device;slideway device;cylinder pushing back device;cone head rotating device;braking device;disconnecting devie

the outside diameter of steel coil Φ1000-1600mm;

the weight of steel coil 6T(max);

The cone head driving motor 4KW

Forming device

Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain

transmission,roller was chromed which can keep the molding plate surface smooth and not easy to be marked when it is working

Feature : Ensure stability , precision and lifetime.

Spare parts ( for free)
1. Easy damaged parts: conk 2 pcs, fuse-link 4 pcs;
2. Rubber mat 1 pcs;
3. Bolt spanner 1 pcs

 

Product

Roller shutter door making machine

Roller shutter door making machine

Our roller shutter door making machine is a kind machine to produce shutter door, it can do thickness from 0.4mm to 1.8mm, the material can be Galvanized sheet or color plate. For our machine, we can make different kind of shutter door sheet with different mould. The speed will be 5m/min to 30m/min.

The Roller shutter door making machine have 5 parts: Decoiler, main making machine, cutter, PLC control and Hydraulic station. Certainly we don’t lack a important part— punch the holes! Generally, we make the dense holes with perforation machine, you can change the mould to change the size and layout of holes. For other holes, it will be made before cut.

Roller shutter door making machine

Quickly information for Roller shutter door making machine

Name Parameter Mark
 

Decoiler

 Coil inner diameter:450-550mm
Coil max width:300mm
Max carrying capacity: 3000kg
 

 

 

Main shutter door making machine

 Number of formingsteps: 12 stations According to profile
Shaft material: 45# steel with quenched

treatment, precision machined, The

diameter: ï¿ 70mm
Roller material: bearing steel

with quenched treatment
Transport: by gear
Motor:4kw According to profile
Speed: 5-30m/min As you need
 

Cutter system

 The material of blade: Cr12Mov，

quenched treatment, precision
Length Tolerance:

3m±1.0mm
Hydraulic station Hydraulic motor Power:3kw
Hydraulic oil: 46#
PLC PLC control system,

we will take Delta

 You can change the brand as

you need

 

 

Other service:

  1. Payment: Now our company accept T/T or L/C , for some special customer, we can support OA payment.

2.For the roller shutter door making machine, Two years guarantee, and we will provide

the technical support for the whole life. We also tech you how to operating the machine for free.

Metal Door Machine

Roofing Glazed Tile Roll Forming Machine

Roofing Glazed Tile Roll Forming Machie

Description

In European markets,people prefer a kind of steped roofing sheets which are called step (roofing) tiles, or glazed (roofing) tiles, so roofing glazed tile roll forming machine or step tile roll forming machine are favoured in Europe.Our glazed roofing tile roll forming machine or step roofing tile roll forming machine is able to produce the step tiles or glazed tiles fully automatically from decoiling,roll forming machine,hydrauilc pressing,hydraulic cutting and running out to supporting tables.

Steel Forming Machine,Single Deck Roll Forming Machine,Roll Forming Equipment

roll forming machine design

Application
This type of metal color roll forming machine has advantage inclouding beautiful, classical appearance and grace taste. It can be widely used in village, hotel, exhibition, vocation vallage, family construction and outdoor decorate.

780banxing

Quick Detail
1.Suitable to process: Color steel plate
2.Width of the plate: 1200mm
3.Rollers: 13 rows
4.Dimensions: 7*1.5*1.5m
5.Power: 4+4kw
6.Rolling material: high grade 45# steel(plated chrome on surface)
7.Thickness of the plate:0.3-0.6mm
8.Voltage: 380V 50Hz 3phases
9.Material of the cutting plate: Cr12
10.Hydraulic: 40#
11.Processing precision: Within 1.00mm
12.Control system: PLC control
1.Material of rollers:45# steel,roller surfaces polishing, hard plating
The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
2.We have a professional design team
3.Can also design and manufacture according to customer’s requirement.
Warranty
1. Two years guarantee, and we will provide the technical support for the whole life.
2. Training: the buyer should charge of visa, return ticket, food and accommodation overseas and USD50/person/day for salary, one technician needed.
4. Training time: one week (contains the time of installation and adjustment)
Electric Control System
Feature:
1.Adopted PLC, frequency converter, Delta from Taiwan to ensure high speed with stability, precision and lifetime.
If you need, we can change it other brand or little computer type for touching screen.

Metal Door Machine

tile roof forming machines

Different tile roof forming machines can produce different shapes of steel tile roof sheets in various thickness and colors. Steel tile roof sheets are the new substitutes for traditional clayey, concrete tiles. They are popular because of their low cost, short building period, re-cycle use, and elegant appearance. They are used as the roof of villas, luxury houses, theatres, exhibition centers, etc.

Detail information:
Processing material: colored steel plate, galvanized plate, or aluminum plate
Material thickness: 0.3—0.8 mm
Material hardness: 195 mpa—350 mpa
Material width: 1250 mm
Formed width: 1100 mm
Glazed Tile are widely used in building: the steel-structured large-scale warehouses, plants, supermarkets, shopping malls, trade markets, stadiums, holiday villages, sanatoriums, hotels, villas, residences, and different kinds of greenhouses. What’s more,
equipment can be designed and manufactured as customers’ requests.

Forming device:

tile roof forming machines forming device

Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission, roller was chromed which can keep the molding plate surface smooth and not easy to be marked when it is working
Feature : Ensure stability , precision and lifetime.
Shearing Mechanism:

Advanced hydraulic drive, automatic punching and cutting after forming, no
distorting or wasting, high level safety factor.
(include cutting tools, hydraulic tank, cutter machine)

Blade Material Cutting system
Cr12 quenched Full automatic

Counter:

One counter gauges length, pulses, and decides length. Omron encoder for length

Measurement.

Controlling device：

1.Adopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with
stability, precision and lifetime.
2.Other electric element are Delta
3.Equipped with movable switch, air break, radiator, transformer & electric leakage
protector for operation convenience and safety.

Screen PLC
Text screen displayer Taida DVP14ES from Taiwan

The service:
1.We can improve some free tool and some parts.
2.If there is any problem found of the machine, we will repair it for free in one year.
3.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
4.Without visiting, we will send you user manual and video to teach you to install and operate.
We also have some another kinds of cold roll forming machine . If you need this kinds of machine or another kinds of machine such as ceiling keel roll forming machine ,Tee bar roll forming machine,color steel roll forming machine and so on. You also can contact us.We will provide you the best cold roll forming machine.
You can contact with me cnzt008@zhongtuocn.com OR ceo@zhongtuocn.com

 

Product

The pantile of color steel roll forming machine

The pantile of color steel roll forming machine:

Applicable to all types of buildings roof decoration, such as decorative Waiyan.With rich colors, long life, corrosion-resistant, maintenance-free, convenient construction, light weight and other characteristics by the use of and connection can be divided into ordinary lap, buckle-lid, seams style, material:Hot-dip galvanized steel and other.
Read More

Metal Door Machine

Wall panel/ roofing sheet/ roll forming linear machine

Wall panel/ roofing sheet/ roll forming linear machine

Wall panel roofing sheet in metal now is quite poplar in building house, factory or temporary working places. In the normal roofing sheet roll forming machine, we only can control length but for the width, we can adjust easily. However, for some situation we need to adjust the width easily. Wall panel/ roofing sheet/ roll forming linear machine was developed based on this need. By this machine, you can make any width roofing sheet within the width 1000 to 2000mm. And meanwhile for the length you can also control by PLC.
Read More